Flat Tire and No Plug Kit: What Are Your Options?

·

If a passenger-car tire goes flat and you have no repair kit, the first decision is where you can safely stop. Ease off the accelerator and get out of traffic as soon as you can do so safely. Once stopped, switch on the hazard lights. On a narrow shoulder or in moving traffic, call for roadside assistance before attempting to work beside the vehicle.

If the vehicle has a spare

Check the owner’s manual for the jacking points and the type of spare supplied. Only change a wheel yourself where the ground is firm and level and there is room to stay clear of traffic. A temporary spare has its own pressure, speed and distance limits. Use the limits marked on that spare and in the manual.

If there is no usable spare

Some cars supply a manufacturer-approved mobility kit or use run-flat tires. Follow the instructions for that specific equipment and its damage limits. If the car has neither, or the tire has a cut, sidewall bulge or visible structural damage, arrange a tow. There is no mileage allowance for driving on a tire sealed with a household substitute.

What the technician needs to know

Tell the shop whether the vehicle was driven after pressure dropped and whether any sealant was used. The tire must come off the wheel for an internal inspection. A small tread puncture can sometimes be repaired. A plug alone cannot seal the inner liner, and sidewall or shoulder damage is outside the repair area.

U.S. Tire Manufacturers Association tire repair guidance